Home Underwater Photography Burst mode - Underwater Photography Masterclass

Burst mode – Underwater Photography Masterclass

-

Nicolas and Lena Remy offer great photography hints and tips for Burst Mode Underwater

All digital cameras offer some capability to shoot in “burst mode”, meaning to keep capturing images continuously, while the shutter is depressed, at a given rate (number of frames per second). In this article, I will cover this functionality into more details, illustrate when it gets useful underwater, and explain how to get the most of your camera’s burst capability.

Camouflaged stargazer agitating its lure, preparing to strike
Camouflaged stargazer agitating its lure, preparing to strike

First of all, not all cameras are created equal, and you should look into the specifications to find out:

  • how fast the camera can continuously shoot: some cameras are capable of only 3 or 5 frames per seconds, some can do 10 or even more. As a general principle, the more megapixels in your camera sensor, the lower the burst rate is. However, if money is not a problem, higher end cameras offer the best of both worlds!
  • how many photos can the camera take at its maximum rate before filling-up its internal buffer, and requiring you to wait, before taking more shots. Some cameras allow virtually unlimited burst shooting, whereas some may allow only 1 or 2 second of continuous shooting.

Burst shooting is popular with topside sport and wildlife photographers, as it helps to capture the “peak of the action”. Putting aside the limited visibility we work with underwater, and the fact that we mostly depend on strobes, this feature can be quite useful underwater, and I’ll share two examples hereafter.

Burst shooting allowed to capture the peak of action! It takes maybe a second for the stargazer to strike and return to its camouflaged position.
Burst shooting allowed to capture the peak of action! It takes maybe a second for the stargazer to strike and return to its camouflaged position.

The first one is fast feeding actions, such as a camouflaged fish striking on its prey. One night I had found a stargazer buried under the sand, which would jump onto the small fishes attracted by the beam of my torch. The attack of a stargazer is super-fast: pressing the shutter once I saw it basically meant missing the shot. Switching gears to my camera’s 10 Frames/second mode, I would shoot short bursts of images as soon as I sensed movement, which eventually allowed me to capture the attack.

Another usage is in super-macro photography with moving subjects: my wife Lena was photographing the tiny Sydney pygmy pipehorse, aiming for a portrait with the fish looking into the camera. As the tiny  “pph” was bouncing left and right with the surge, there was only a fraction of a second during which the fish would be well positioned. Shooting short bursts as “the” moment came allowed Lena to capture the very attitude she was after.

A short burst of photos at 10 FPS allowed to capture the pygmy’s portrait exactly how & where we needed it to be.
A short burst of photos at 10 FPS allowed to capture the pygmy’s portrait exactly how & where we needed it to be.

Now, using burst mode in underwater photography comes with a few specific challenges: even if your camera is capable of a high frame rate, the rest of your gear might hold you back, so keep in mind the following:

  • Can your strobes cope with the intended shooting rate? Assume you’re shooting at 10 FPS, strobes will have to fire every 0.1 seconds, whereas most strobes will require 2 or 3 seconds to recycle at full power. This means you would need to stop down your strobe significantly, so that a few continuous shots can be taken before emptying the capacitors. In turn, this also imply increasing the ISOs to compensate for the lower strobe output.
  • Can your strobe trigger cope? In many cameras the internal flash is used to trigger strobes via fiber optic, and its own recycling rate might become limiting. Solutions include shooting in manual flash exposure (where the internal flash can be set at its minimal power), or triggering via the camera’s hotshoe (electrical connection, or electric-to-LED flash trigger).
  • Use fast memory cards: once your camera’s buffer fills-up, you will need to wait for photos to transfer to your memory card. How long you wait depends on how fast is the memory card you’re using.

For the above reasons, it makes sense to set our strobes at very low power and shoot only a handful of image, when using burst photography. In our experience, we rarely needed to shoot burst for more than half a second at a time, which meant 4-5 photos were taken, all between 1 and 6% of the strobe’s maximum power. Doing so, we “dumped” less light onto our subjects than we would have by taking 1 photo at 50% power. To some extent, this ensure we minimize our impact onto marine life, whilst tapping into new creative possibilities.

Article Written By Nicolas Remy

Photo Credit: Nicolas Remy & Lena Remy

For more images from Nicolas and Lena visit their Website, Nicolas & Lena Remy Photography or follow them on Instagram and Facebook

Want to Read more about Photography?

Underwater Photography by Simon Lorenz

Facebook Comments

Avatar
Adrian Stacey
Scuba Diver ANZ Editor, Adrian Stacey, first learned to dive on the Great Barrier Reef over 24 years ago. Since then he has worked as a dive instructor and underwater photographer in various locations around the world including, Egypt, Costa Rica, Indonesia, Thailand, Mexico and Saba. He has now settled in Australia, back to where his love of diving first began.

Connect With Us

9,865FansLike
4,680FollowersFollow
996FollowersFollow
3,836SubscribersSubscribe

Scuba Diver ANZ Posts

Raja Ampat the Perfect Post COVID 19 Destination

Raja Ampat the Perfect Post COVID 19 Destination

Why Raja Ampat is the Perfect Post-COVID 19 Destination Papua Paradise Eco Resort have the answer for banishing the COVID 19 Blues. If you, like so...
Maubara Bommie

Scuba Diving of Timor Leste

Facebook Comments